Hello again, Well First this is my setup:
| Internet
| <--- Modem
| <--router (With 4 pc support outlets)
| <----- PC 1 (Mine) OS: Linux
| <--- PC 2 (Mom) OS: Windows
| <--- PC 3 (Webserver) Linux
| <--- future reserved pc ??
Ok, now when I click in Redhat Network Device control. The router, and the modem start to blink as if it is sending data. It stops and no connection. I cannot configure the router, because the software that is provided runs on windows only. I tried to run it on wine but no go! It says device not found. As we know Linux is not windows it does not use the same control Panel if any unless you call the gnome control panel thing)
I tried using the ip supplied with the router. It comes up with not found in my mozilla browser. I believe you guys seen my router from earlier pictures in earlier posts.
My configuration (If I am wrong I am willing to change it :grin However I tried almost all including changing the router numbers in route)
Here it is: (profile & configuration I use the GUI version)
============= only Profile Section=============
<Describe> My profile: </Describe>
Status : Device: Nickname:
Active ppp0 Verizon
=========My configuration setup==================
<Describe> Device(s): </Describe>
Profile: Status: Device: nickname: Type:
X Active ppp0 Verizon xDSL
<Describe> Hardware: </Describe>
Description: Type: Device:
RealTek RTL-8139 SMC EZ Ca Ethernet etho
<Describe> Dns: </Describe>
All is Redhat autodetected
X autodetect Dialup X
Primary: (auto detected)
Secondary: (auto detected)
Tertiary: Blank
Dns Search Path: Blank
<Describe> Host: </Describe>
Ip: Name: Aliases:
Seems local localhost.localdomain localhost
Btw, Friendship is not bought I think but earned! (Big Grin)
[ August 01, 2003: Message edited by: TuxLinux ]
[ August 01, 2003: Message edited by: TuxLinux ]