Author Topic: FreeBSD 4.7 startx issue  (Read 1142 times)

Calum

  • Global Moderator
  • Member
  • ***
  • Posts: 7,812
  • Kudos: 1000
    • Calum Carlyle's music
FreeBSD 4.7 startx issue
« on: 3 February 2003, 21:22 »
question:
i just installed FreeBSD 4.7 on my laptop, when i log in as root, i can startx no problem at all but when i try to start it as a user, i can't. otiginally it told me i needed to be a member of the group 'wheel' to do startx, no problem, added myself in /etc/group, but for some reason i still can't startx as a user.

edit: actually, i can't startx as root either now, and as far as i can tell, the only thing i changed in my XF86Config file was to change the mouse type from ps/2 to usb, and the curious thing is that my mouse now works (and has a 3d look graphical pointer!) in the text-only screen, and i can't startx (most confusing - how's it displaying the mouse pointer if there's no X?)

anyway, here's the error log of both situations. the first is the error log of the user who cannot startx despite being a member of group 'wheel', the second is the error log of the superuser who cannot startx after some slightly odd mouse business went on.

Any help sorting this out will be much appreciated.

 
quote:
xauth:  creating new authority file /home/calum/.Xauthority
xauth: (argv):1:  bad display name ":0" in "list" command
xauth:  creating new authority file /home/calum/.Xauthority
xauth: (argv):1:  bad display name ":0" in "add" command
xauth:  creating new authority file /home/calum/.Xauthority
xauth: (argv):1:  bad display name ":0" in "list" command
xauth:  creating new authority file /home/calum/.Xauthority
xauth: (argv):1:  bad display name ":0" in "add" command


Fatal server error:
Cannot open log file "/var/log/XFree86.0.log"


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
Please report problems to [email protected].

giving up.
xinit:  Connection refused (errno 61):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.
xauth:  creating new authority file /home/calum/.Xauthority
xauth: (argv):1:  bad display name ":0" in "remove" command
xauth: (argv):1:  bad display name ":0" in "remove" command


----------------
 
quote:

XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
   If the server is older than 6-12 months, or if your card is
   newer than the above date, look for a newer version before
   reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: FreeBSD 5.0-CURRENT i386 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Feb  3 16:53:36 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "monitor"
(**) |   |-->Device "sis"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XLeds" "1 2 3"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled, /usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75d pi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) Module ABI versions:
   XFree86 ANSI C Emulation: 0.1
   XFree86 Video Driver: 0.5
   XFree86 XInput driver : 0.3
   XFree86 Server Extension : 0.1
   XFree86 Font Renderer : 0.3
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.0.0
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 0.1.0
   ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 11 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,8a hdr 80
(II) PCI: 00:01:0: chip 1039,0008 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0900 card 1039,0900 rev 80 class 02,00,00 hdr 00
(II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:4: chip 1039,7018 card 1584,5001 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:01:6: chip 1039,7013 card 1584,4003 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 1217,6872 card 0001,0000 rev 05 class 06,07,00 hdr 02
(II) PCI: 01:00:0: chip 1039,6300 card 1584,5001 rev 11 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 0.1.0
   ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
   
  • -1   0x00000000 - 0x0000ffff (0x10000) IX

(II) Bus 0 non-prefetchable memory range:
   
  • -1   0x00000000 - 0xffffffff (0x0) MX

(II) Bus 0 prefetchable memory range:
   
  • -1   0x00000000 - 0xffffffff (0x0) MX

(II) Bus -1: bridge is at (0:1:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 1 I/O range:
   
  • -1   0x0000a000 - 0x0000afff (0x1000) IX

(II) Bus 1 non-prefetchable memory range:
   
  • -1   0xefc00000 - 0xefcfffff (0x100000) MX

(II) Bus 1 prefetchable memory range:
   
  • -1   0xdfa00000 - 0xefafffff (0x10100000) MX

(--) PCI:*(1:0:0) SiS 630 rev 17, Mem @ 0xe0000000/27, 0xefce0000/17, I/O @ 0xac80/7
(II) Addressable bus resource ranges are
   
  • -1   0x00000000 - 0xffffffff (0x0) MX
  • [1] -1   0x00000000 - 0x0000ffff (0x10000) IX

(II) OS-reported resource ranges:
   
  • -1   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0x00000000 - 0x000000ff (0x100) IX
(II) Active PCI resource ranges:
   
  • -1   0xffdf0000 - 0xffdfffff (0x10000) MXE
  • [1] -1   0xffde0000 - 0xffdfffff (0x20000) MX
E
   [2] -1   0xffdd0000 - 0xffddffff (0x10000) MXE
   [3] -1   0xffdc0000 - 0xffdfffff (0x40000) MXE
   [4] -1   0xf0000000 - 0xffffffff (0x10000000) MXE
   [5] -1   0xefce0000 - 0xefcfffff (0x20000) MX(B)
   [6] -1   0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
   [7] -1   0x0000d800 - 0x0000d8ff (0x100) IXE
   [8] -1   0x0000dc00 - 0x0000dcff (0x100) IXE
   [9] -1   0x0000d400 - 0x0000d4ff (0x100) IXE
   [10] -1   0x0000d000 - 0x0000d0ff (0x100) IXE
   [11] -1   0x0000ffa0 - 0x0000ffbf (0x20) IXE
   [12] -1   0x00000374 - 0x00000377 (0x4) IXE
   [13] -1   0x00000170 - 0x0000017f (0x10) IXE
   [14] -1   0x000003f4 - 0x000003f7 (0x4) IXE
   [15] -1   0x000001f0 - 0x000001ff (0x10) IXE
   [16] -1   0x0000ac80 - 0x0000acff (0x80) IX(B)
(II) PCI Memory resource overlap reduced 0xffde0000 from 0xffdfffff to 0xffdeffff
(II) PCI Memory resource overlap reduced 0xffdc0000 from 0xffdfffff to 0xffdcffff
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xffffffff to 0xf7ffffff
(II) Active PCI resource ranges after removing overlaps:
   
  • -1   0xffdf0000 - 0xffdfffff (0x10000) MXE
  • [1] -1   0xffde0000 - 0xffdeffff (0x10000) MX
E
   [2] -1   0xffdd0000 - 0xffddffff (0x10000) MXE
   [3] -1   0xffdc0000 - 0xffdcffff (0x10000) MXE
   [4] -1   0xf0000000 - 0xf7ffffff (0x8000000) MXE
   [5] -1   0xefce0000 - 0xefcfffff (0x20000) MX(B)
   [6] -1   0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
   [7] -1   0x0000d800 - 0x0000d8ff (0x100) IXE
   [8] -1   0x0000dc00 - 0x0000dcff (0x100) IXE
   [9] -1   0x0000d400 - 0x0000d4ff (0x100) IXE
   [10] -1   0x0000d000 - 0x0000d0ff (0x100) IXE
   [11] -1   0x0000ffa0 - 0x0000ffbf (0x20) IXE
   [12] -1   0x00000374 - 0x00000377 (0x4) IXE
   [13] -1   0x00000170 - 0x0000017f (0x10) IXE
   [14] -1   0x000003f4 - 0x000003f7 (0x4) IXE
   [15] -1   0x000001f0 - 0x000001ff (0x10) IXE
   [16] -1   0x0000ac80 - 0x0000acff (0x80) IX(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
   
  • -1   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
   
  • -1   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0xffdf0000 - 0xffdfffff (0x10000) MXE
   [6] -1   0xffde0000 - 0xffdeffff (0x10000) MXE
   [7] -1   0xffdd0000 - 0xffddffff (0x10000) MXE
   [8] -1   0xffdc0000 - 0xffdcffff (0x10000) MXE
   [9] -1   0xf0000000 - 0xf7ffffff (0x8000000) MXE
   [10] -1   0xefce0000 - 0xefcfffff (0x20000) MX(B)
   [11] -1   0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
   [12] -1   0x0000ffff - 0x0000ffff (0x1) IX
   [13] -1   0x00000000 - 0x000000ff (0x100) IX
   [14] -1   0x0000d800 - 0x0000d8ff (0x100) IXE
   [15] -1   0x0000dc00 - 0x0000dcff (0x100) IXE
   [16] -1   0x0000d400 - 0x0000d4ff (0x100) IXE
   [17] -1   0x0000d000 - 0x0000d0ff (0x100) IXE
   [18] -1   0x0000ffa0 - 0x0000ffbf (0x20) IXE
   [19] -1   0x00000374 - 0x00000377 (0x4) IXE
   [20] -1   0x00000170 - 0x0000017f (0x10) IXE
   [21] -1   0x000003f4 - 0x000003f7 (0x4) IXE
   [22] -1   0x000001f0 - 0x000001ff (0x10) IXE
   [23] -1   0x0000ac80 - 0x0000acff (0x80) IX(B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.0.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.0.0
   Module class: XFree86 Server Extension
   ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.0.1
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.1.10
   Module class: XFree86 Font Renderer
   ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 0.6.0
   Module class: XFree86 Video Driver
   ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.0.0
   Module class: XFree86 XInput Driver
   ABI class: XFree86 XInput driver, version 0.3
(II) SIS: driver for SiS chipsets: SIS5597, SIS530, SIS6326, SIS300,
   SIS630, SIS540
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS630 found
(II) resource ranges after xf86ClaimFixedResources() call:
   
  • -1   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0xffdf0000 - 0xffdfffff (0x10000) MXE
   [6] -1   0xffde0000 - 0xffdeffff (0x10000) MXE
   [7] -1   0xffdd0000 - 0xffddffff (0x10000) MXE
   [8] -1   0xffdc0000 - 0xffdcffff (0x10000) MXE
   [9] -1   0xf0000000 - 0xf7ffffff (0x8000000) MXE
   [10] -1   0xefce0000 - 0xefcfffff (0x20000) MX(B)
   [11] -1   0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
   [12] -1   0x0000ffff - 0x0000ffff (0x1) IX
   [13] -1   0x00000000 - 0x000000ff (0x100) IX
   [14] -1   0x0000d800 - 0x0000d8ff (0x100) IXE
   [15] -1   0x0000dc00 - 0x0000dcff (0x100) IXE
   [16] -1   0x0000d400 - 0x0000d4ff (0x100) IXE
   [17] -1   0x0000d000 - 0x0000d0ff (0x100) IXE
   [18] -1   0x0000ffa0 - 0x0000ffbf (0x20) IXE
   [19] -1   0x00000374 - 0x00000377 (0x4) IXE
   [20] -1   0x00000170 - 0x0000017f (0x10) IXE
   [21] -1   0x000003f4 - 0x000003f7 (0x4) IXE
   [22] -1   0x000001f0 - 0x000001ff (0x10) IXE
   [23] -1   0x0000ac80 - 0x0000acff (0x80) IX(B)
(II) resource ranges after probing:
   
  • -1   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0xffdf0000 - 0xffdfffff (0x10000) MXE
   [6] -1   0xffde0000 - 0xffdeffff (0x10000) MXE
   [7] -1   0xffdd0000 - 0xffddffff (0x10000) MXE
   [8] -1   0xffdc0000 - 0xffdcffff (0x10000) MXE
   [9] -1   0xf0000000 - 0xf7ffffff (0x8000000) MXE
   [10] -1   0xefce0000 - 0xefcfffff (0x20000) MX(B)
   [11] -1   0xe0000000 - 0xe7ffffff (0x8000000) MX(B)
   [12] 0   0x000a0000 - 0x000affff (0x10000) MS
   [13] 0   0x000b0000 - 0x000b7fff (0x8000) MS
   [14] 0   0x000b8000 - 0x000bffff (0x8000) MS
   [15] -1   0x0000ffff - 0x0000ffff (0x1) IX
   [16] -1   0x00000000 - 0x000000ff (0x100) IX
   [17] -1   0x0000d800 - 0x0000d8ff (0x100) IXE
   [18] -1   0x0000dc00 - 0x0000dcff (0x100) IXE
   [19] -1   0x0000d400 - 0x0000d4ff (0x100) IXE
   [20] -1   0x0000d000 - 0x0000d0ff (0x100) IXE
   [21] -1   0x0000ffa0 - 0x0000ffbf (0x20) IXE
   [22] -1   0x00000374 - 0x00000377 (0x4) IXE
   [23] -1   0x00000170 - 0x0000017f (0x10) IXE
   [24] -1   0x000003f4 - 0x000003f7 (0x4) IXE
   [25] -1   0x000001f0 - 0x000001ff (0x10) IXE
   [26] -1   0x0000ac80 - 0x0000acff (0x80) IX(B)
   [27] 0   0x000003b0 - 0x000003bb (0xc) IS
   [28] 0   0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 0.1.0
   ABI class: XFree86 Video Driver, version 0.5
(==) SIS(0): Write-combining range (0xa0000,0x10000) was already clear
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 0.1.0
   ABI class: XFree86 Video Driver, version 0.5
(--) SIS(0): Unofficial driver (16.01.02) by Thomas Winischhofer
(**) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(==) SIS(0): Using HW cursor
(==) SIS(0): PCI retry enabled
(==) SIS(0): Fast VRAM enabled
(==) SIS(0): TurboQueue enabled
(--) SIS(0): Detected DRAM type : SDRAM
(--) SIS(0): Detected memory clock : 100.226MHz
(--) SIS(0): Detected VRAM bus width is 64
(--) SIS(0): Linear framebuffer at 0xE0000000
(--) SIS(0): MMIO registers at 0xEFCE0000
(--) SIS(0): Relocate IO registers at 0xAC80
(--) SIS(0): VideoRAM: 8192 KB
(--) SIS(0): Video BIOS version 1.06.53 detected
(--) SIS(0): Detected LVDS video bridge (Type 2)
Total Adapter Bandwidth is 200.452M
CRT1 Used Bandwidth is 100.226M
(==) SIS(0): Min pixel clock is 16 MHz
(--) SIS(0): Max pixel clock is 69 MHz
(II) SIS(0): monitor: Using hsync range of 31.50-57.00 kHz
(II) SIS(0): monitor: Using vrefresh range of 50.00-100.00 Hz
(II) SIS(0): Clock range:  16.25 to  69.54 MHz
(II) SIS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "360x200" (unknown reason)
(II) SIS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "320x240" (unknown reason)
(II) SIS(0): Not using default mode "400x300" (unknown reason)
(II) SIS(0): Not using default mode "400x300" (unknown reason)
(II) SIS(0): Not using default mode "400x300" (unknown reason)
(II) SIS(0): Not using default mode "400x300" (unknown reason)
(II) SIS(0): Not using default mode "400x300" (unknown reason)
(II) SIS(0): Not using default mode "512x384" (unknown reason)
(II) SIS(0): Not using default mode "512x384" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "512x384" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "512x384" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "512x384" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "576x432" (unknown reason)
(II) SIS(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "640x512" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "640x512" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) SIS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) SIS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) SIS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) SIS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) SIS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) SIS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "832x624" (unknown reason)
(II) SIS(0): Not using default mode "416x312" (unknown reason)
(II) SIS(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "700x525" (unknown reason)
(II) SIS(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1600x1024" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x512" (hsync out of range)
(--) SIS(0): Virtual size is 1024x768 (pitch 1024)
(**) SIS(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) SIS(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) SIS(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) SIS(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) SIS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) SIS(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(==) SIS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.0.0
   ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.2.0
   ABI class: XFree86 Video Driver, version 0.5
(II) SIS(0): Accel Enable
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
   compiled for 4.2.1, module version = 1.0.0
   ABI class: XFree86 Video Driver, version 0.5
(II) SIS(0): initializing int10
(==) SIS(0): Write-combining range (0xa0000,0x20000) was already clear
(==) SIS(0): Write-combining range (0xf0000,0x10000)
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 8192 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor:
visit these websites and make yourself happy forever:
It's my music! | My music on MySpace | Integrational Polytheism

flap

  • Member
  • **
  • Posts: 1,268
  • Kudos: 137
FreeBSD 4.7 startx issue
« Reply #1 on: 3 February 2003, 22:22 »
shouldn't the mouse protocol be IMPS/2, not USB?
"While envisaging the destruction of imperialism, it is necessary to identify its head, which is none other than the United States of America." - Ernesto Che Guevara

http://counterpunch.org
http://globalresearch.ca


Calum

  • Global Moderator
  • Member
  • ***
  • Posts: 7,812
  • Kudos: 1000
    • Calum Carlyle's music
FreeBSD 4.7 startx issue
« Reply #2 on: 3 February 2003, 22:32 »
it was 'PS/2' to start with (which is what xf86config set it to) but i played around because my laptop's glidepoint is totally incompatible with such a setting, and i wanted to get either my serial port mouse or my usb mouse to work with it (preferably the usb one). that's not the issue with the normal user though i am sure, and as i said i found that USB made the mouse work and have a GUI type pointer even when X is not running (??????????) but all of a sudden X won't start (more ????????)
visit these websites and make yourself happy forever:
It's my music! | My music on MySpace | Integrational Polytheism

Pantso

  • Member
  • **
  • Posts: 1,249
  • Kudos: 55
    • http://www.support-freesoftware.org
FreeBSD 4.7 startx issue
« Reply #3 on: 3 February 2003, 22:32 »
The second case (not being able to do startx even as root) is definitely a problem that has to do with your mouse's re-configuration that evidently broke your X server.

As for the first case, it's really the first time I see a similar problem, that is not being able to do startx as a normal user. It should have something to do with user permissions. How about trying to create another user from scratch?

flap

  • Member
  • **
  • Posts: 1,268
  • Kudos: 137
FreeBSD 4.7 startx issue
« Reply #4 on: 3 February 2003, 22:44 »
The mouse may have worked but the error message clearly states USB protocol isn't recognised, and that's why it bombs out. Just try changing it to IMPS/2.
"While envisaging the destruction of imperialism, it is necessary to identify its head, which is none other than the United States of America." - Ernesto Che Guevara

http://counterpunch.org
http://globalresearch.ca


Calum

  • Global Moderator
  • Member
  • ***
  • Posts: 7,812
  • Kudos: 1000
    • Calum Carlyle's music
FreeBSD 4.7 startx issue
« Reply #5 on: 3 February 2003, 23:08 »
IMPS/2 is not supported on this platform either, so i changed it back to PS/2 and /dev/sysmouse and now X starts as root but the mouse does not work. i suppose i'll have to search out a way of making a USB mouse work in FreeBSD.

now i created a new user from scratch and the new user has just the same problems that the original user had starting X. exactly the same problems.

freebsd sure is irritating. it has some sort of problem with the keyboard too (not the keymap, the actual pressing of keys et c). plus, where's tab completion? and shift-pageup?

more specifically, i am still clueless about this X thing...
visit these websites and make yourself happy forever:
It's my music! | My music on MySpace | Integrational Polytheism

flap

  • Member
  • **
  • Posts: 1,268
  • Kudos: 137
FreeBSD 4.7 startx issue
« Reply #6 on: 3 February 2003, 23:09 »
Are you using bash?
"While envisaging the destruction of imperialism, it is necessary to identify its head, which is none other than the United States of America." - Ernesto Che Guevara

http://counterpunch.org
http://globalresearch.ca


Calum

  • Global Moderator
  • Member
  • ***
  • Posts: 7,812
  • Kudos: 1000
    • Calum Carlyle's music
FreeBSD 4.7 startx issue
« Reply #7 on: 3 February 2003, 23:16 »
yup. oh actually i might be using 'sh' are they different on freeBSD? i was assuming that sh and bash would be the same thing.
visit these websites and make yourself happy forever:
It's my music! | My music on MySpace | Integrational Polytheism

flap

  • Member
  • **
  • Posts: 1,268
  • Kudos: 137
FreeBSD 4.7 startx issue
« Reply #8 on: 3 February 2003, 23:19 »
No, sh and bash are different shells.
"While envisaging the destruction of imperialism, it is necessary to identify its head, which is none other than the United States of America." - Ernesto Che Guevara

http://counterpunch.org
http://globalresearch.ca


MikeU

  • Newbie
  • *
  • Posts: 15
  • Kudos: 0
FreeBSD 4.7 startx issue
« Reply #9 on: 4 February 2003, 02:22 »
Here's my mouse section in XF86Config file for FreeBSD 4.7. It works fine with both my M$ Optical Mouse and a generic USB mouse.

Code: [Select]

You can configure the sysmouse using /stand/sysinstall

You should be able to see the mouse moving even when X isn't started if you configure it correctly.

Calum

  • Global Moderator
  • Member
  • ***
  • Posts: 7,812
  • Kudos: 1000
    • Calum Carlyle's music
FreeBSD 4.7 startx issue
« Reply #10 on: 4 February 2003, 13:42 »
thanks! i'll try that when i get home!

well, it'll take me a few days actually as i have really made my hard drive into a huge bitbucket what with partitioners and bootloaders and so on but never mind!
visit these websites and make yourself happy forever:
It's my music! | My music on MySpace | Integrational Polytheism

Master of Reality

  • VIP
  • Member
  • ***
  • Posts: 4,249
  • Kudos: 177
    • http://www.bobhub.tk
FreeBSD 4.7 startx issue
« Reply #11 on: 4 February 2003, 18:00 »
I had a problem with my USB mouse in freebsd..... I now use a PS/2 mouse, but i dont use FreeBSD anymore.
Disorder | Rating
Paranoid: Moderate
Schizoid: Moderate
Linux User #283518
'It takes more than a self-inflicted gunshot wound to the head to stop Bob'

Calum

  • Global Moderator
  • Member
  • ***
  • Posts: 7,812
  • Kudos: 1000
    • Calum Carlyle's music
FreeBSD 4.7 startx issue
« Reply #12 on: 4 February 2003, 18:06 »
so the lesson here is that to fix the problem i should use different software and different hardware. hey thanks! that's worth a try! (end sarcasm mode)
visit these websites and make yourself happy forever:
It's my music! | My music on MySpace | Integrational Polytheism

5amYan

  • Member
  • **
  • Posts: 27
  • Kudos: 0
    • http://www.intersiege.com
FreeBSD 4.7 startx issue
« Reply #13 on: 17 February 2003, 11:45 »
Did you resolve this?

I use 4.7 on three machines.  USB mouse works fine on all.  

As far as the shell goes if you want bash you need to install it.  If you installed the ports tree;
cd /usr/ports/shells/bash2 && make all install clean
as root of course. Then you'll need to set it as the default for new users. Try adduser and set it how you want.

I used bash when I first converted to FBSD.
then I started playing with csh (I think it is really a link to tcsh) which is roots default shell.  I love it it autocompletes and if you enter part of a command you can scroll back through the instances of that command in your history... and many more features.  Unless you change it sh is the default for regular users.
5amYan
4.6692016090
-- Last line of the author's current message. --

Calum

  • Global Moderator
  • Member
  • ***
  • Posts: 7,812
  • Kudos: 1000
    • Calum Carlyle's music
FreeBSD 4.7 startx issue
« Reply #14 on: 17 February 2003, 18:58 »
well i didn't resolve this unfortunately, the laptop i had freebsd installed on has died and it will be a while before i can afford another computer. if i install freebsd on my desktop computer, the mouse will be a ps/2 one, not a usb one, so i'll never know now, will i?
visit these websites and make yourself happy forever:
It's my music! | My music on MySpace | Integrational Polytheism